Analog Recorders

DAHUA-1465-FO Model: XVR7416L-4KL-X

5 in 1 XVR, 16 ch HDCVI (8MP@7fps) HDTVI/AHD (5MP@12fps), CVBS + 16 ch IP 12MP (added to BNC input). BNC input can become IP. H.265+/H.265/H.264+/H.264. Audio: 4 in / 1 out. 16 ch. 128 Mbps. Recording: 12MP (only IP), 4K/8MP (7 fps), 6MP (10 fps), 5MP (12 fps), 4MP, 3MP (15 fps), 4M-N, 1080P, 720P, 960H, D1, CIF, QCIF (25 fps). HDMI output 1 at 4K, HDMI 2 with SPOT function at 1080P, VGA at 1080P and BNC output. HDCVI IoT. POS. IVS. facial detection. Alarm: 16 in / 6 out. 4 HDD SATA up to 10TB. RJ45 Gigabit. Onvif, CGI, P2P, DDNS. 3 USB, 1 eSATA, 1 RS485, 1 RS232. 220V AC. SmartPSS and Apps iDMSS/gDMSS.



• Smart H.265+: Smart Codec, H.265+ can reduce up to 90% bit rate and storage requirements compared with H.264 without having to invest in new cameras.

• HDCVI/AHD/TVI/CVBS: Auto-detect The XVR can auto recognize the signal of front-camera without any setting. It makes operation more friendly and convenient.

• Long Distance Transmission: The HDCVI system supports long distance transmission over coaxial cable and UTP, max. 700m for 4K/4MP, 800m for 1080P and 1200m for 720P.

• IoT Functionality: HDCVI IoT can achieve multi-dimensional surveillance by integrating sensors with monitoring video, which not only can generate the report for analysis but also prevent risk in advance.

• POS Functionality: This funcion includes POS ticket information overlay and search which can be widely used in retail programs

SPOT output: HDMI 2 port for secondary monitor. 

• Intelligent Video System (IVS): With built-in intelligent video analytics, the XVR has the ability to detect and analyze moving objects for improved video surveillance. The XVR provides optional standard intelligence at the edge allowing detection of multiple object behaviors such as abandoned or missing objects. IVS also supports Tripwire analytics, allowing the camera to detect when a pre-determined line has been crossed.

• Face Detection: It is a typical technology being used in a variety of applications for searching or identification of individuals.

• Smart Search: This function helps you get more motion detect video during a short time through drawing a region when playback. It is very useful when an emergency occurs.

• Fisheye camera: Dewarping fisheye through web client and SmartPSS (local mode not available). Preview of fisheye HDCVI cameras without dewarping.


- 5 in 1 COLOSO EVOLUTION DVR up to 16 ch: (960H), CVI (up to 8MP/4K), TVI/AHD (up to 5MP) + 16 ch IP (12MP)
- 5 technologies: IP, HDCVI, HDTVI, AHD and CVBS with automatic signal recognition
- Display and playback on all channes at 1080P
- H.265+/H.265/H.264+/H.264
- 16 BNC inputs:
  • HDCVI: 8MP/4K, 6MP, 4MP, 1080P, 720P
  • HDTVI: 5MP, 4MP, 3MP, 1080P, 720P
  • AHD: 5MP, 4MP, 3MP, 1080P, 720P
  • CVBS: 960H (NTSC/PAL)
- IP camera inputs: 16 IP inputs at 12MP (added to BNC inputs)
- 2x HDMI (HDMI-1 up to 4K, HDMI-2 with SPOT function up to 1080P), 1 VGA output (up to 1080P) and 1 BNC output
- Output division with IP mode OFF: 1, 4, 8, 9, 16
- Output division with IP mode ON: 1, 4, 8, 9, 16, 25, 36
- 4 audio BNC inputs / 1 audio BNC outputs
- 2 way audio: 1 MIC input / 1 MIC output, BNC 
- Recording resolution: 12MP (only IP), 8MP/4K (3840x2160), 6MP, 5MP, 4MP, 3MP, 4M-N (1280x1440), 1080P (1920x1080), 720P (1280x720), etc.
- Maximum input bandwidth: 32 Mbps
- Stream 1: 8MP (1~7 fps), 6MP (1~10 fps), 5MP (1~12 fps), 4MP/3MP (1~15 fps), 4M-N/1080P/720P/960H/D1/CIF/QCIF (1~25 fps)
- Stream 2: 960H (1~15 fps), D1/CIF (1~25 fps)
- Manual recording modes, by calendar, by video detection, video loss, manipulation, alarm, stop
- Recording interval: 1~60 min (60 min default), pre-recording 1~30 sec., post-recording 10~300 seg.
- Independent motion detection configuration by camera (22x18 selectable grid), video loss and masking detection, diagnosys
- 16 channel playback
- 16 alarm inputs / 6 relay outputs
- 4 HDD SATA internal capacity up to 10TB (not included)
- 1 eSATA port
- OSD with improved graphic interface
- Software and hardware watchdog
- Watermark
- Third party support: Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek, etc.
- Fan can be switched on/off automatically depending on CPU temperature
- Network port: RJ45 Gigabit (1000M)
- Network protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, Wi-Fi, 3G/4G, SNMP, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, Filtro IP, PPPoE, DDNS, FTP, alarm server, P2P, IP search 
- Up to 128 users
- Compatible with ONVIF 16.12 and CGI
- Compatible with iPhone, iPad, Android (App EVO and Peepall)
- Free client software SmartPSS (multi-connection) and connection via browser (IE, etc.)
- eMail sending with attached picture
- Programmed or alarmed FTP sending
- Display on iPhone via APP iDMSS and Android via APP gDMSS
- Fixed or dynamic IP via Dyndns service, NoIP, DDNS Evolution, etc.
- SmartPSS and App iDMSS/gDMSS software
- 1x USB 2.0, 2x USB 3.0, 1x RS485 and 1x RS232 (for PTZ control)
- Power supply: 100V ~240V AC, 50/60Hz (<35W, without discs)
- Working temperature: -10°C ~ +55°C
- Working RH: 0%~90%
- Storage temperature: -20°C ~ +70°C
- Storage RH: 0%~90% 
- Dimensions: 440 x 417 x 76 mm (1,5U)
- Weight: 4,8 kg
- Desktop installation


Share to your social networks.      
The access to the selected section may take a few minutes depending on the volume of documentation. Please wait, sorry for the delay.