IP VDP

Reference
DAHUA-2095-FLUSH Model: DHI-KTP01(F)



IP video intercom kit consisting of: x1 SIP IP video intercom station DAHUA-2029 (VTO2202F-P), x1 DAHUA-2097 embedding box (VTM114), x1 DAHUA-2031 SIP IP monitor (VTH2421FW-P), x1 DAHUA PoE switch -1789 (PFS3005-4ET-60).

Dahua

 

Kit composed by:

  • x1 VDP station IP SIP DAHUA-2029 (VTO2202F-P)
  • x1 Recessed box DAHUA-2097 (VTM114) for VDP
  • x1 IP monitor SIP DAHUA-2031 (VTH2421FW-P)
  • x1 Switch PoE DAHUA-1789 (PFS3005-4ET-60)

 

VDP station

  • H.264 video compression
  • 2 MP CMOS image sensor
  • 1.95 mm fisheye optics
  • 160 ° viewing angle (H)
  • WDR support
  • G.711 U audio compression
  • Omnidirectional microphone
  • Incorporates speaker
  • Mechanical button
  • TF memory card slot up to 64GB (card not included)
  • 1 RS485 port
  • 1 input / 1 alarm output
  • 1 lock control port
  • 1 door status detection port
  • 1 Eoc port
  • 1 port for exit button
  • 1 tamper switch
  • Network interface
  • 12V DC power output, 100 mA
  • IP55
  • IK07
  • Built in aluminum
  • Recessed or surface installation
  • Power: 12V CCV, 1A
  • Consumption: ≤12W
  • Operating temperature of -30C ~ + 60 ° C
  • Relative humidity of 10% ~ 90%
  • Dimensions: 96 (W) x 130 (H) x 39.9 mm
  • Weight: 350g

 

Recessed box

  • Recessed box for DAHUA-2029 video intercom (VTO2202F-P)
  • Built in ADC12 aluminum alloy
  • It consists of a flush-mounted box and a trim plate
  • Box dimensions: 123 (W) x 157 (H) x 35 mm
  • Trim dimensions: 128.9 (W) x 162.9 (H) x 34.5 mm

 

SIP Monitor 

  • Embedded Linux operating system
  • 7 ”color LCD screen (1024x600)
  • Capacitive touch screen
  • H.264 video compression
  • G.711A / G.711U / PCM audio compression
  • It incorporates omnidirectional microphone
  • 1.5W speaker included
  • Supports echo cancellation and noise reduction
  • IP video surveillance
  • Alarm Integration
  • Up to 9 sub-stations
  • Supports SOS alarm
  • RJ45 interface
  • 6 inputs / 1 alarm output
  • PoE power
  • Consumption: ≤4W (standby), ≤6W (running)
  • Working temperature: -10 ° C ~ + 55 ° C
  • Relative humidity: 10% ~ 95%
  • Not suitable for outdoor
  • Dimensions: 221.5 (W) x 119.6 (H) x 21.5 mm
  • Weight: 350g
  • Wall mount

 

Switch PoE

  • Switch PoE switch unmanageable L2 comercial range
  • 4x 10/100 Base-T (PoE/PoE+)
  • 1x 10/100 Base-T
  • PoE consumption: ≤60W (port 1), ≤30W (port 2 a 4), ≤60W total
  • PoE protocol: IEEE802.3af, IEEE802.3at, Hi-PoE
  • Switching capacity: 1 Gbps
  • Packet Forwarding Rate: 744 Kbps
  • Packet buffer memory: 488 Kb
  • MAC table zise: 1K
  • Flow control enabled
  • Power supply: 48V ~ 57V DC (power supply included)
  • Working temperature: -10°C ~ +55°C
  • RH 5% ~ 95%
  • Lightning-proof: 2KV (common mode), 1KV (differential mode)
  • Dimensions: 130 x 85 x 26 mm
  • Weight: 290 g

Notes




Share to your social networks.      
The access to the selected section may take a few minutes depending on the volume of documentation. Please wait, sorry for the delay.