GSM/GPRS alarm transmission

Reference
QAR-360 Model: LX20G-5C



GPRS transmitter with voice channel. Data encryption via AES standard. Telephone input in DTMF standard. Sending SMS messages. 5,000 events. Small antenna connector



The equipment allows to realize bidirectional through GPRS, with the integrated exchanges, through the modem included in the own plate of the GPRS. The integrated plant models to date are Napco®, Satel®, Crow®, Risco® GTI, Aritech ™, DSC®, Pyronix®, Paradox®, Texecom®.


- Universal GPRS transmitter for alarm panels with Contact ID / SIA protocol
- Allows the remote programming (transparent) of alarm centers (downloading) of different manufacturers
- 4 bands GSM
- Watchdog (GPRS and GSM)
- Transmission in TCP protocol with AES encryption
- Supports DNS
- Permanent control of the communication channel
- Integration with information download applications from different manufacturers
- 2 programmable NA / NC inputs
- 3 auxiliary outputs OC (100 mA max.)
- Work together with telephone line and SMS channel as backup media
- No receiver required for any of the functions
- Simulation of telephone line in GSM voice channel
- Communication in voice channel
- Remote firmware configuration and replacement
- Modem standby status
- Telephone entry in DTMF standard (support of alarm units with dialer)
- SMS notifications up to 5 mobile phone numbers
- History of up to 5,000 events
- Diagnostic mode for the installer
- Authorization of configuration and control SMS messages
- Control of the number of SMS sent, incoming SMS forwarding
- Possibility to set priorities for RTC, GSM or GPRS lines
- Main and backup server support
- Power supply of 12V ~ 13.8V DC, 150 mA
- Dimensions: 163 x 73 x 35 mm


Approved with grade ATS-5. For Grado-II installations, using as main alarm transmission system, and Grado-III, using as an additional transmission system, according to the standard UNE-EN 50131-1, reflected in the BOE dated February 18, 2011.

Notes

SAT 3/18/2019 3:24:22 PM
Apreciado cliente, es la referencia QAR-269. Un saludo.
JUAN 6/7/2018 1:17:48 PM
QUE CABLE NECESITO PARA PROGRAMAR
Achraf 3/21/2019 10:41:10 AM
Cher client, vous avez un manuel en anglais, si vous ne le trouvez pas dans la zone de téléchargement du site, vous pouvez le demander à sat. Sincères salutations
Achraf 3/21/2019 10:41:17 AM
Cher client, vous avez un manuel en anglais, si vous ne le trouvez pas dans la zone de téléchargement du site, vous pouvez le demander à sat. Sincères salutations
Achraf 3/21/2019 10:41:22 AM
Cher client, vous avez un manuel en anglais, si vous ne le trouvez pas dans la zone de téléchargement du site, vous pouvez le demander à sat. Sincères salutations
3/18/2019 6:03:04 PM
bonjour Auriez vous une notice en fancais pour le Qar 360
Achraf 11/18/2019 10:00:02 AM
Buenos días estimado cliente, El software para configurar los transmisores EBS es (GPRS CONFIGURATOR), está disponible para descargar en nuestra página WEB en la sección: Manuales y Software / INTRUSION / PROGRAMAS / EBS / CONFIGURADOR. Gracias por contactarnos, saludos.
Jose 11/14/2019 8:54:40 AM
Que software es el que se necesita para programar estos transmisores GPRS



Share to your social networks.      
The access to the selected section may take a few minutes depending on the volume of documentation. Please wait, sorry for the delay.