Products - LAST UNITS - CCTV - DVR / XVR

DVR / XVR

Reference
SAM-3470 Model: NB-XVR4116HS



16 channel 5 in 1 XVR (HDCVI/HDTVI/AHD/CVBS + 2 IP at 5MP). H264. Audio (4 in / 1 out). 16 ch @ 1080N. Recording: 1080N, 720P, 960H, D1/4CIF, VGA, CIF, QVGA, QCIF, full 1080N/720P in all cameras. HDMI and VGA output @ 1080P with SPOT function. Intelligent Video Surveillance. Facial detection. 1 HDD SATA. Onvif, CGI. 2 USB. 12V DC. SMARTPSS , IDMSS y P2P.

      

            

- 16 channel 5 in 1 XVR  960H, HDCVI/HDTVI/AHD (1080N, 720P) + 2 IP channel (5MP)
- 5 technologies: IP, HDCVI, HDTVI, AHD and CVBS 
- Auto signal recognition
- 1080p channel display and playback/recording @ 1080N and 720p
- H264 
- LINUX embedded S/O
- 16 BNC inputs:
  • HDCVI: 1080N, 720P
  • HDTVI: 1080N, 720P
  • AHD: 1080N, 720P
  • CVBS: 960H
- IP camera input: 2 channel @ 5MP
- HDMI & VGA video output with SPOT function to use with an assigned monitor 
- Output division: 1, 4, 8, 9, 16
- Audio: 4 RCA in / 1 RCA out (2 way audio via channel 1)
- Display resolution: 1080P (1920x1080), SXGA (1280x1024), 720P (1280x720), XGA (1024x768)
- Recording resolution: 1080N (960x1080), 720P (1280x720), 960H/WD1 (960x576), etc.
- Stream 1: 1 channel 1080N/720P @ 25/30 fps + 15 channel 1080N/720P @ 12/15 fps or 16 channel 960H @ 25/30 ips
- Stream 2: CIF, QCIF (1~7 fps)
- Recording modes: Manual, calendar (regular, continous), motion detection (video detection: motion detection, video loss, manipulation), alarm, stop
- Recording intervals: 1~120 min. (60 min. default) / 1~30 seg. (pre-recording) / 10~300 seg. (post-recording)
- Remote control via keyboard (Joystick) connected by TCP/IP or RS485
- Independent motion detection configuration by camera (22x18 selectable grid, sensibility adjustment, video loss and masking detection)
- 16 channel simultaneous display
- Smart search function helps to obtain a better video detection during a short period time
- 1 HDD SATA up to  6TB (not included)
- HDD mode simple
- On screen display
- Software and hardware Watchdog
- Watermark
- 3D intelligent positioner with compatible motorized domes
- Network port: RJ45 (100 Mbps)
- Network protocols: HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, Filtro IP, PPPoE, DDNS, FTPCompatible with iPhone, iPad, Android
- Emails sended with attached picture
- Programmed FTP or alarmed
- Smartphone display on iPhone and Android via iDMSS app
- Fixed/dynamic IP via Dyndns, NoIP, DDNS, etc.
- SmartPSS software control (international version)
- Communication ports: 2 USB 2.0, 1 RS485 (for PTZ control)
- Power supply: 12V DC, 2A (<10W, without discs)
- Working temperature: -10°C ~ +55°C
- RH: 0~90% 
- Dimensions: 260 x 236 x 48 mm (desktop)
- Weight: 750 g (without HDD)

Notes




Share to your social networks.      
The access to the selected section may take a few minutes depending on the volume of documentation. Please wait, sorry for the delay.