Industrial Switches

Reference
SAM-4370 Model: KSD-541-HP



PoE+ switch (L2) industrial range of 4 RJ45 ports 10/100Mbps + 1 combo ports (RJ45 Fast Ethernet or SFP). Power supply is not included.




Features
- Industrial range PoE + switch with 4 RJ45 ports 10 / 100Mbps + 1 combined port (RJ45 Fast Ethernet or SFP)
- Management L2
- 4 ports PoE / PoE + RJ45 10 / 100Mbps, auto-negotiated, automatic detection of MDI / MDI-X
- 1 combo port (RJ45 10 / 100Mbps and Fast Ethernet SFP slot 100Base-FX for standard SFP transceiver)
- PoE consumption: ≤30W (ports 2 to 5), 125W in total
- PoE Protocol: IEEE802.3af, IEEE802.3at
- Up to 100 meters with CAT5e network cable
- Meets IEEE standards 802.3, 802.u, 802.3x, 802.3af, 802.3at
- Supports 802.3x flow control for Full-Duplex and back-pressure for Half-Duplex
- Compatible with previous versions with 802.3af PD
- 1K MAC table
- Provides the types of power supply interfaces: Jack and terminal block
- Power input 6V ~ 60V DC
- Maximum consumption without PoE of 4W
- PoE voltage of 44V ~ 57V DC
- Maximum consumption with PoE + of 125W
- Does not include feeder (recommended: SAM-4417)
- Storage temperature of -40 ° C ~ + 85 ° C
- Operating temperature of -30 ° C ~ + 70 ° C
- Relative humidity of 10% ~ 90% (without condensation)
- Metal housing without internal fan
- Dimensions: 144 x 104.5 x 26 mm
- Supports DIN rail mounting

Notes




Share to your social networks.      
The access to the selected section may take a few minutes depending on the volume of documentation. Please wait, sorry for the delay.